MightyOhm

Version 1.2 of the Arduino sketch that powers the AVR HV Rescue Shield is now available for download.

The revised sketch now displays the target AVR’s existing fuse settings before asking you for new ones.

I also cleaned up and reworked the code in a couple places, but these changes shouldn’t affect the existing functionality.

If you have any issues or questions about the new code, post them in the support forum or contact me directly.

Now through July 9th, order an AVR HV Rescue Shield kit and get 20% off!

AVR HV Rescue Shield Kit – $19.95

Here’s a quick look at the new Blinken Button kit from Interactive Matter.

If you want to try your hand at surface mount soldering, this is a fun project that can be completed in a couple hours with a decent soldering iron and a pair of tweezers.  The instructions aren’t perfect (I had to short across the PCB pads for D1 and D2 to get my programmer to talk to the AVR, and at the moment you have to install Eclipse to compile the hex file) but I am confident that these minor issues will be fixed shortly!

This week there have been a couple minor updates to the AVR HV Rescue Shield:

• I just uploaded version 1.1 of the Arduino sketch, which fixes an issue with garbage being printed in the serial monitor between burn cycles.  I also made some minor changes to try to reduce the likelihood of getting serial gibberish upon opening the monitor window, although I’m not 100% sure what is causing this.  The sketch was compiled and tested with Arduino 0017.
• I have verified that the shield works with the Atmel ATmega328P AVR microcontroller.

This weekend I hosted a post-Halloween kit building party at MightyOhm HQ.

Nine close friends built Conway’s Game of Life kits from Adafruit Industries.  This is my favorite kit for these kinds of workshops because it’s easy for beginners to complete in about 2 hours, and when everyone is done, you can wire all of the kits together to create one large cellular automata display.  The last time I helped people build this kit was at a Make:SF workshop at the TechShop in Menlo Park.

Here’s a timelapse video of the afternoon, shot with a Logitech QuickCam Vision Pro webcam on an Eee PC 4G running Booru Webcam 2.0.

The capture interval was 5 seconds.  I used Quicktime Pro to stitch the images together at 15fps and iMovie to add titles and music (Turbo Outrun by FRP from remix.kwed.org.)

I wore my Halloween costume for most of the afternoon.  What am I?  Most people on the streets of San Francisco had no idea…

Safety first!

Stuart was the first to finish his kit:

Soldering the kits together to form the matrix:

Nine happy kit-builders with the 3×3 matrix they created with their finished kits:

And lastly, a video of the 3×3 matrix in action:

Three people had little to no soldering experience at the beginning of the afternoon.  Everyone who came went home with a working kit.  Success!