MightyOhm.com

I checked the Testpoint with my oscilloscope and yes it gives 12V for about 250ms. These are my configurations I made to the sketch: // User defined settings #define MEGA 0 // Set this to 1 if you are using an Arduino Mega (default = 0) #define DEFAULTMODE ATMEGA // If running in non-interactive mod...

I tested the shield with 3 misfused atmega 88ps and I tested to write high and low, and then just low. All with the same result. I have before also tested to oszillate the misfused 88p with another 88p where i set the fuse to let it output its clock signal on pin 14 (checked with oscilloscope) but i...

I have now tested the Shield wit the Arduino Uno Rev 3 without success, here is the result:

http://www.freeimagehosting.net/y7vak

and this is how I put the Shield on the board:

http://www.freeimagehosting.net/sac8i

(is it normal that there are 2 slots free on the left side?)

Hi
I have now ordered an Arduino uno. I had not much time the last two weeks but ill try out this one.
The values seemed to vary each time I tried to read the fuses, but sometimes they stayed a few times.
I'll make a screenshot as soon as I come back home.

Hello! I got my HV Rescue Shield 2.1 yesterday (Thank You :) ) and soldered it together. However I have a problem getting it to work. Like mentioned in the title I want top reset the fuses of a ATMEGA88P (the host board is a Arduino Mega 2560), but the Arduino Board keeps reading in some random Numb...