Rescued an ATmega1284P-AU

Topics related to the HV Rescue Shield:
http://mightyohm.com/hvrescue2
Post Reply
JChristensen
Posts: 8
Joined: Fri Jan 17, 2014 3:51 am

Rescued an ATmega1284P-AU

Post by JChristensen »

I've been working with the ATmega1284P in the TQFP package. Not exactly sure what happened, but I hosed the fuse bits. Happy to report that the HV Rescue Shield works nicely on the 1284P! It wasn't pretty, but I can't argue with success. I did have to remove the 10K pullup resistor and 1N4148 diode on the reset pin and solder a wire to the board to access the XTAL1 pin.

W00T!
User avatar
mightyohm
Site Admin
Posts: 1064
Joined: Fri Apr 03, 2009 10:29 pm
Location: Seattle, WA
Contact:

Re: Rescued an ATmega1284P-AU

Post by mightyohm »

Congrats! And that doesn't look so bad - nice breadboard holder!
Post Reply