MightyOhm Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
Microcontrollers known to work with the [[http://mightyohm.com/avr_rescue|HV Rescue Shield]] and [[http://mightyohm.com/hvrescue2|HV Rescue Shield 2]]

This list is in progress and by no means complete.  Most devices that are pin-compatible with the ones shown here will work with no modification to the Rescue Shield software or hardware.

If you have good results with a device that is not listed, please consider adding it.

Hardware versions < 2.0 (the original version of the shield):

  * ATmega48/88/168 
  * ATmega48P/88P/168P/328P (only 328P has been tested)
  * ATmega48PA/88PA/168PA (should work, but have not been tested)
  * ATtiny2313 

Hardware versions >= 2.0 (the HV Rescue Shield 2, with 3 IC sockets):

  * All microcontrollers shown above for the original hardware
  * ATtiny13A
  * ATtiny25/45/85
  * most 8-pin ATtiny microcontrollers should be supported, since they share the same HVSP protocol
  * if you have tested a part not listed here, please consider adding it to the list!

Note: Not all ATtiny parts have an EFUSE.  If you try to read the EFUSE on a device that doesn't have one shown in the datasheet, it will most likely return 0xFF, and attempts to change it will not work (but could have unexpected results).