projects:hotplate
This is an old revision of the document!
Table of Contents
DIY PID-Controlled Soldering Hotplate
This page goes with the project originally documented here.
PID Controllers
- Sure Electronics CD101 - Cheap ($33 USD), K-type thermocouple only, Keith used this one in his hotplate project.
- Omega CN77343-A2 - The PID controller I used. Expensive new, >$200!
- Omega has cheaper PID controllers, but I haven't used any of them. Some are under $100.
- Auber SYL-2362 - $40, I have no experience with this one, but it universal input and only 75mm deep.
projects/hotplate.1292095129.txt.gz · Last modified: 12/11/2010 19:18 by jeff