MightyOhm.com

Check out this post: https://mightyohm.com/forum/viewtopic.php?t=3333 Some teams have run into issues at very high altitudes, possibly stemming from corona discharge of the HV portions of the circuit. The tube circuit is very high impedance so it is sensitive to this. The power supply is also somewh...

Sorry folks. It would probably be easier to use Dan's project as inspiration to re-create this project from scratch at this point.

Nice, thanks for the link!

Burny4600 wrote: ↑

Mon Feb 28, 2022 7:26 am

Are there also connections for FHEM?

Chris

What is FHEM?

Hrm, this looks like a libraries issue - probably the libraries have changed over time and the old code no longer builds. Have you tried reaching out to Dan Watson?

http://syncchannel.blogspot.com/2016/01 ... tyohm.html

Glad you got it sorted out. Enjoy your kit!

I've never released a full BOM for a few reasons, but primarily to discourage blatant low-effort ripoffs of the kit. The other big reason is that in over ten years no one has ever asked for it! :D The existing BOM actually has a lot of good info and I think there's only a few places where you have t...

You are very welcome. Let me know if you have any more questions!
Enjoy your kit!

Hans, Glad you are enjoying your kit! It's not unusual to hear clicks with VR1 fully counterclockwise. In this case I would set it somewhere between 9 and 12 o'clock. VR1 sets the high voltage. You can use a 1 gigaohm resistor and a DMM to check and set the voltage to 400V. Make sure your DMM has a ...

OK, that is very helpful, thanks. It sounds like your Geiger tube is bad. If the tube came with your kit, you can send an email to support@mightyohm.com and I'll send a replacement.