Search found 12 matches

by Jeff_
Wed Nov 16, 2011 12:37 am
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: OPKG url invailed
Replies: 5
Views: 13802

Re: OPKG url invailed

allready found out that it was misspelled,do you know if I can use the atmega 328 for the display ? Found a complete kit on eBay: http://www.ebay.com/itm/Arduino-Starter-Kit-Duemilanove-ATmega-328-version-1602-/270627362140 Also I can't get it connected to my wpa/wpa2psk network,only if I make it in...
by Jeff_
Mon Nov 14, 2011 4:44 am
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: OPKG url invailed
Replies: 5
Views: 13802

OPKG url invailed

each time i type opkg update i get the following error: root@OpenWrt:/# opkg update Downloading http://mightyohm.com/files/kamikaze-2.4/packages/mipsel/Packages/Pac kages.gz wget: bad address 'mightyohm.com' Signiture check for snapshots skipped because GPG support was not enabled in thi s build Col...
by Jeff_
Mon Nov 14, 2011 4:34 am
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: no airlight can not connect to network
Replies: 5
Views: 11336

Re: no airlight can not connect to network

i totally can't get it working on encrypted network, i normally use wpa2-psk with aes and my ssid has a''-'' in it.
the only possible way to connect it is changing it to uncrypted
by Jeff_
Wed Oct 12, 2011 11:59 am
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: WL 520 doesnt start up
Replies: 15
Views: 24245

Re: WL 520 doesnt start up

If I press w than I can edit the text but when I press w than I thought that it went back to the edit mode, and if I pressed wq than it says q is not implemented.
So I'm not quite shure if it writes to the memory.
by Jeff_
Sun Oct 09, 2011 1:11 pm
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: WL 520 doesnt start up
Replies: 15
Views: 24245

Re: WL 520 doesnt start up

So this weekend i finally had some time to redo it with a brand new one,This one is equipped with dd-WRT firmware,Successfully re flashed it with the open WRT (kamikaze build). But now i'm stuck with editing the files in hyperterminal. I can load the files and modify the value's,but the only thing t...
by Jeff_
Sun Jun 05, 2011 3:11 am
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: WL 520 doesnt start up
Replies: 15
Views: 24245

Re: WL 520 doesnt start up

You don't need a serial port to flash the openwrt firmware. I didn't use one. However if you want to add a display and button, you need it. Second, the wl520gu is available in holland for around 45 euro. So no a lot more than on ebay. 43 euro at redcoon. 45 euro at zercom (eindhoven), used to be 25...
by Jeff_
Sat Jun 04, 2011 1:22 pm
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: WL 520 doesnt start up
Replies: 15
Views: 24245

Re: WL 520 doesnt start up

Hum… didnt test it beforehand, but why bother the information on the box was all plain Chinese, but I think it was a standard Asus firm. The one that I bought now ( again from eBay ) is equipped with dd-wrt on it so I dont need a serial header wright ? Anyway I made another serial adapter, cause i d...
by Jeff_
Sat Jun 04, 2011 10:45 am
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: WL 520 doesnt start up
Replies: 15
Views: 24245

Re: WL 520 doesnt start up

mightyohm wrote:The router that works with my tutorial is the Asus Wl-520gU. The WL-500gU V2 should work too. I don't have any experience with other routers, you'll probably have to use a different firmware.
The one that you have bought was it equipped with the dd-wrt firmware ?
by Jeff_
Sat Jun 04, 2011 3:07 am
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: WL 520 doesnt start up
Replies: 15
Views: 24245

Re: WL 520 doesnt start up

This is the crappy converter that i made

Image
Image
by Jeff_
Fri Jun 03, 2011 1:09 pm
Forum: Wifi Radio Project / Hacking the Asus WL-520gU
Topic: WL 520 doesnt start up
Replies: 15
Views: 24245

Re: WL 520 doesnt start up

The one From lady Ada (FTDI) same as you have used for your wl 520 with hyperterminal ,But now I need to wait for the new router cause it just died about an hour ago (I screwed the pcb up :oops: ) I'll upload the pictures from the soldered prepboard tomorrow. For now i've just need to wait, But sinc...