Ok, I've tried two different speaker parts but neither seem to be the right one (at least in terms of how they fit)
Can I get a part # for the speaker so I don't keep adding to my collection of parts?
An Amazon link would be fine...
Thanks
Earl
Trying to figure out the right Speaker
Re: Trying to figure out the right Speaker
Earl,
A piezo speaker should have been included in your kit. Where did you purchase the kit?
A piezo speaker should have been included in your kit. Where did you purchase the kit?
Jeff Keyzer
http://mightyohm.com
http://mightyohm.com
Re: Trying to figure out the right Speaker
I bought the board from you directly.
I had 99% of the parts sitting around here so I just ordered a board.... but of course, none of the speakers handy have the
right pin spacing to fit your board. Didn't see a clear spec on the part so the ask.
(I just built and Adafruit USBtinyISP AVR to programm the chip today... so getting close... just need to find one cap and the speaker..)
Earl
I had 99% of the parts sitting around here so I just ordered a board.... but of course, none of the speakers handy have the
right pin spacing to fit your board. Didn't see a clear spec on the part so the ask.
(I just built and Adafruit USBtinyISP AVR to programm the chip today... so getting close... just need to find one cap and the speaker..)
Earl
Re: Trying to figure out the right Speaker
Earl -
Sorry for the late reply, I've been traveling these past few days.
The speaker is TDK PS1740P02E. Other piezo speakers with similar pin spacing (10mm) should also work!
Sorry for the late reply, I've been traveling these past few days.
The speaker is TDK PS1740P02E. Other piezo speakers with similar pin spacing (10mm) should also work!
Jeff Keyzer
http://mightyohm.com
http://mightyohm.com