Page 1 of 1

Trying to figure out the right Speaker

Posted: Mon Nov 18, 2019 11:47 am
by ebaugh
Ok, I've tried two different speaker parts but neither seem to be the right one (at least in terms of how they fit)
Can I get a part # for the speaker so I don't keep adding to my collection of parts? :-)

An Amazon link would be fine...

Thanks
Earl

Re: Trying to figure out the right Speaker

Posted: Mon Nov 18, 2019 2:31 pm
by mightyohm
Earl,

A piezo speaker should have been included in your kit. Where did you purchase the kit?

Re: Trying to figure out the right Speaker

Posted: Tue Nov 26, 2019 9:57 am
by ebaugh
I bought the board from you directly.
I had 99% of the parts sitting around here so I just ordered a board.... but of course, none of the speakers handy have the
right pin spacing to fit your board. Didn't see a clear spec on the part so the ask.

(I just built and Adafruit USBtinyISP AVR to programm the chip today... so getting close... just need to find one cap and the speaker..)

Earl

Re: Trying to figure out the right Speaker

Posted: Tue Dec 03, 2019 10:20 am
by mightyohm
Earl -

Sorry for the late reply, I've been traveling these past few days.

The speaker is TDK PS1740P02E. Other piezo speakers with similar pin spacing (10mm) should also work!