I hate to bother you with this, but I just couldn't figure this out myself.
So I own the WL-500G Premium and did the whole tutorial and it basically works like a charm. However a while ago I had to reset the whole thing ( stupid network-access related thing) and now one problem reemerged.
I'm close to the proposed sound config in
/etc/mpd.conf
with one addition, namely the mixer. In total my audio config is
Code: Select all
audio_output {
type "oss"
name "My OSS Device"
device "/dev/sound/dsp"
mixer_device "/dev/sound/mixer"
format "44100:16:2"
}
If I remove the mixer-line to get the proposed config only, it says "volume:n/a".
I remember that it did work before I set the whole thing back to zero. Unfortunately I'm unable to recall just what it was I did. Maybe one of you did have the same problem or something related and he / she is able to help me out?
It would be REALLY much appreciated!
Best regards,
interpohl
edit: I forgot to mention that I do hear audio output, i.e. that the general audio setup as stated above is working, but I can't change the mpd volume.