Stuck at Burn Fuses
Posted: Tue Sep 08, 2015 9:39 pm
I'm trying to recover some reset disabled Tiny13A's using the HV Rescue Sheild 2.1 which I just received and assembled tonight.
I'm not having any luck getting past the Burning Fuses... prompt:
Select mode:
1: ATmega (28-pin)
2: ATtiny2313
3: ATtiny (8-pin) / HVSP
Selected mode: ATtiny/HVSP
Insert target AVR and press button.
Existing fuse values:
LFUSE: 4
HFUSE: 4
Enter desired LFUSE hex value (ie. 0x62): 6A
Enter desired HFUSE hex value (ie. 0xDF): FF
Burning fuses...
... it just hangs here forever
Any ideas?
I'm not having any luck getting past the Burning Fuses... prompt:
Select mode:
1: ATmega (28-pin)
2: ATtiny2313
3: ATtiny (8-pin) / HVSP
Selected mode: ATtiny/HVSP
Insert target AVR and press button.
Existing fuse values:
LFUSE: 4
HFUSE: 4
Enter desired LFUSE hex value (ie. 0x62): 6A
Enter desired HFUSE hex value (ie. 0xDF): FF
Burning fuses...
... it just hangs here forever
Any ideas?